Metal roofing prices in Eugene typically range from $5.50 to $20 per square foot for installation, depending on the material and complexity of your project, while repairs often start around $450. Several factors influence the final cost, including roof size, material choice, and accessibility, but understanding these can help you plan with confidence.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Eugene and the southern Willamette Valley: panel systems engineered for long wet winters, constant moss and dry summer sun, installed over high-temperature synthetic underlayment with proper ventilation and careful flashing details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Eugene homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as rain-soaked wood decking swells and dries through the seasons. Superior wind resistance and a durable low-gloss finish. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of moss-covered composition shingle, worn cedar shake or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some insurers offer discounts for impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Eugene mid-century ranch homes. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing limb-dented, loosened or damaged panels, resealing seams and penetrations, and fixing failed flashing before winter rain becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and chimney and dormer transitions) and fixed right, not just caulked over. Emergency tarping available after winter windstorms. |
| Screw Replacement & Re-Fastening | From $750 | Eugene's wet winters and dry summers swell and shrink roof decking and expand and contract metal roofs through the year, so screws back out and aged washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for homes, carports, barns and workshops across Lane County. Quality panels in low-glare earth-tone colors, installed with proper screw patterns and closures that keep out wind-driven rain and fir needles. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Eugene homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for winter storms. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent wind and impact performance, Class A fire rating, and profiles that mimic the cedar shake and slate looks common on Eugene homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last a century in the damp Willamette Valley air. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of moss-streaked, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance protective coating systems that extend roof life 10-15 years, restore color and freshen curb appeal without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and siding transitions, the number one leak point on Eugene roofs. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Retention guards and rail systems for steep metal roofs: rarely needed in Eugene's mild winters, but useful above entries, walkways and decks where an occasional freezing-rain event or a slide of wet debris could shed off slick panels all at once. Honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of windstorm and falling-limb damage to metal roofing: thorough documentation with photos, honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and moss, UV and weather wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry heavy winter downpours away from siding and foundations, with details that handle fir needles, maple leaves and moss. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, shops, wineries, churches, carports and light commercial buildings across Lane County: from grass-seed farm buildings around Coburg to shops in Whiteaker and Bethel, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs require more materials and labor, and complex designs with multiple slopes, valleys, or penetrations increase installation time and cost.
- Material type and gauge : Standing seam, corrugated panels, metal shingles, and stone-coated steel have different price points, and thicker gauges or specialty metals like copper cost more.
- Accessibility and roof height : Steep roofs, multi-story homes, or limited access may require additional safety equipment and labor, raising the overall price.
- Condition of existing roof and additional services : Removing old roofing, repairing decking, or adding features like snow guards or gutters adds to the project cost.
What's included
- Travel included across the Eugene area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof dimensions, material preference, and any specific concerns ready before calling Eugene Metal Roofing at (541) 743-7131. Their free estimate includes a thorough inspection and a detailed written quote covering materials, labor, and cleanup, so you know exactly what to expect.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type, roof complexity, labor, and additional services. For example, corrugated panels start at $5.50 per square foot, while copper roofing starts at $20 per square foot. Factors like roof pitch, accessibility, and the need for structural repairs also affect the final cost.
Do you offer free estimates?
Yes, Eugene Metal Roofing provides free estimates for metal roof installation, replacement, and most repair services. Call (541) 743-7131 to schedule an appointment and get a detailed quote.
What payment methods do you accept?
Eugene Metal Roofing accepts cash, checks, and major credit cards. Financing options may be available for larger projects; ask for details when you call (541) 743-7131.